Heinner HCH-218-TF, Инструкция по эксплуатации

Страница: 14 / 23


Connect the appliance to safety socket (with earth pin connection).

Turn on switch to the heating position.
Model HCH-218-TF
0 Off(Stop)
I 900 W
II 1800 W
Turbo

Turn the thermostat knob in the direction of clockwise until reaching the maximum
temperature.

Once the room temperature is reached, slowly turn the thermostat knob in the
direction of anticlockwise until you hear a click and then the heater will stop working.

The heater will turn on and off automatically to maintain the room temperature you
have set.

Turn off the switches to stop working. Unplug the appliance then after.
TURBO

Turn on the switch on the front face of the heater « » for fan function when the
thermostat is on working position.
TIMER OPERATION (FIG 6) :
- The centre of the timer has 3 position slide switch.

In the centre position (denoted by the clock symbol) the timer will switch the heater
on and off at times set by the segments. (See setting the timer below)

The position denoted by the
“I” is a timer override postion, the timer will continue to
run but power will be supplied continuously to the heater, this enable the heater to
be on all the time if required.

In the postion denoted by the
“0”, the timer continues to run but no power is
supplied to heater
.
- Setting the timer:

Ensure the slide switch on the timer is at the mid position next to the clock symobl.

Rotate the outer ring of the timer in a clockwise direction until the current time is