Heinner ForestBreeze Sense 230, Инструкция по эксплуатации

Страница: 19 / 51

www.heinner.com 50W, 50-60Hz, 220-240V
18
FILTER CLEANING / REPLACEMENT
Notes!
Be sure to turn off the appliance before any maintenance and cut off power.
FILTER LIGHTS FLASHES – Clean filter components when cleaning filter light flashes.
↓
Cleaning method : clean the filter with a vacuum cleaner or a brush (once every two
weeks)
↓
Replace the filter : replace the filter (once three to six months, depending on the
environment). It is recommended to replace the filter when the filter components are
broken or filtering effect is poor.
↓
Filter reset : after cleaning and replacing the filter, long press “ionization” on the panel for
3 seconds to reset the filter
-
It is recommended to clean the filter once every two weeks and replace the filter
once every six months (the cleaning and replacement cycle can be adjusted according to
the operating environment);
-
Do not wash the filter with water;
- It is recommended to use a small soft brush or household vacuum cleaner when
cleaning the filter;
-
When cleaning with a brush, the brush should be traversed along the filter. Avoid
vertical brush as far as possible, so as not to damage the filter;
-
When cleaning with a vacuum cleaner, keep the suction port 5-10mm away from the
surface of the filter to avoid damaging the filter.
-
When used under the strong odor of cigarettes, grilled meat, etc., the filter may have
odors within a few weeks or months. Please clean and air the filter (2-5 days) at this time.
If the odor still cannot be removed, replace the filter.