Heinner ForestBreeze Sense 205, Руководство пользователя

Страница: 22 / 45

www.heinner.com 22W, 50Hz, 220-240V
21
Notes: please confirm the following contents before the entrusted maintenance
Problems
encountered Reason Troubleshooting
The air quality
indicator keeps
red during
continuous
operation. Maybe the room area exceeds the
purification capacity of the machine
The filter components may not have been
installed Please keep the purifier running
continuously
Please install the filter components
correctly
The purifier can't
run The power cord may not be plugged in, or
the power cord may not be in good contact.
The power switch may not have been
turned on Please plug in the power and make good
contact
Please turn on the power switch
The effect of
removing smoke
and odor is poor. Maybe the filter components are not
installed
Maybe the filter components have expired
Maybe the air inlet is blocked by foreign
objects Please install the filter components
correctly
Please replace the new filter assembly
Please remove the foreign matter from
the air inlet
The air quality
indicator does not
change It may be that the sensitivity of the sensor is
unstable for a period of time after the start
of operation. If it doesn't change after
turning green, the air may be in a clean
state
It may be placed in a location where dirt
monitoring is difficult, or the sensor is dirty
The strong indoor odor may cause the
sensor sensitivity to decrease Please wait, after a few minutes of
operation, the sensor will stabilize
Blow the cigarette to the sensor.
If the indicator color changes, it is
normal Please move the purifier or clean
the sensor
Please adjust the fan speed to high grade
and run for several hours to 1 day
Filter cleaning
light does not go
out It may be that after cleaning the filter
components, the "negative ion" button was
not long pressed for 3 seconds After cleaning the filter components,
long press the "negative ion" button for
3 seconds
Odor and smoke
are difficult to
remove It may be that the filter assembly is still
wrapped in the package Please remove the packing bag outside
the filter components
VIII. TROUBLESHOOTING