www.heinner.com 85W, 50/60 Hz, 220-240V
10
IV. BEFORE FIRST USE
Danger: Keep the packaging material away from children .They could suffocate.
Unpack the citrus juicer and remove all of the packaging.
Examine the juicer for visible damage and check that all of the parts are present.
You should clean the appliance before using it for the first time.
Wipe the motor base with a damp cloth.
Before using the juicer for the first time, rinse the cones, strainer, juice container and
transparent dust lid with warm water and a few drops of washing liquid.
V. USING THE APPLIANCE
Setting up the juicer:
1.
Stand the appliance on an even surface that is easy to clean.
2.
Unwind the power cord – to the length you require – from the cord storage
compartment (underneath the juicer). Make sure that the cord is in a good
condition before usage.
3.
Connect the mains plug to a AC230V, 50Hz socket outlet.
Juicing
:
Caution: if you apply too much pressure to the juicing cone, the motor may seize.
1.
Remove the cover.
2.
Fit the appropriate cone onto the drive shaft.
3.
The juice appropriate cone onto the drive shaft:
a.
If you wish to collect the juice in the container, press the spout
upwards to close it.
b.
If you want the juice to run straight into a glass, press the spout
downwards to open it and place a cup, or any other kind of container
under it.
4.
Cut a citrus fruit in half and press the cut end of one fruit half onto the cone.
The juicer switches on automatically when you press the fruit down and the
cone starts to turn. The juicer automatically switches off as soon as you reduce
pressure on the cone. The cone scrapes the pulp out and squeezes the juice
from the fruit. The juice flows through the strainer into the juice container
from where it can run into a glass (the spout must be open). The strainer
keeps back thick pulp and seeds.
5.
To maximize the quantity of juice extracted from a fruit, press a fruit onto the
cone several times.