7
Translation of the original Instructions / CombiGrinder
4
Transport and accepting delivery
Check the delivery on receipt immediately for completeness and transport damage.
The grinder is supplied in a case without the fitted disc. It is essential that the disc is
protected during transport. If the grinder is not transported in the case, ensure that it
cannot fall over or slide.
All units are transported at the owner's risk. Before accepting delivery, thoroughly
inspect the Grinder for damage. If any has occurred, you should note the nature and
extent of the damage in view of any insurance claim you may wish to make.
The following areas should be checked carefully:
Protection cover: it should be located securely in place.
Electrical components, disc, and emery.
5 Assembly and function
5.1 Equipment
Included:
-
1 Basic unit with motor and cable
-
1 Protective cover
-
1 Safety glasses
-
1 Ear protection
-
1 Instruction manual
Version Cattle/Horse
Version Pet
-
1 Grinding disc Ø352mm cattle/horse
- 1 Grinding disc Ø352mm pet
-
1 Grinding paste coarse
- 1 Grinding powder pet 1.9 kg can
-
1 Precision ruler
- 1 Sponge rubber 20/20
-
1 Grinding paste applicator
-
1 Grinding holder for flat blades
Optionally available:
-
Hollow gauge (silicon carbide stone) 799-054
-
Grinding holder for domed clipper blades 718-002
The actual scope of delivery can differ for specially designed models. Or if ordered
with further options.
The CombiGrinder is dispatched completely; however, it must be assembled and set
up before being used for grinding. For full setup instructions refer to chapter 6 of this
manual.
