2
Figure 2 - Hydraulic Unit Components
Handle
Assembly
Oil Filler
Plug
Release
Valve
Saddle/
Extension
Screw
Handle
Sleeve
Ram
Plunger
SAFETY AND GENERAL INFORMATION
Save these instructions
. For your safety, read, understand, and follow the information provided with and on this wheel
dolly before using. The owner and/or operator of this equipment shall have an understanding of this equipment and safe
operating procedures before attempting to use. The owner and/or operator shall be aware that use and repair of this
product may require special skills and knowledge. Instructions and safety information shall be conveyed in the operator's
native language before use of this product is authorized. If any doubt exists as to the safe and proper use of this wheel
dolly, remove from service immediately.
Inspect before each use
. Do not use if broken, bent, cracked, or damaged parts (including labels) are noted. Any
wheel dolly that appears damaged in any way, operates abnormally or is missing parts, shall be removed from service
immediately and the manufacturer notified. If you suspect that the product was subjected to a shock load (a load dropped
suddenly, unexpectedly upon it), immediately discontinue use until it has been checked by a factory authorized service
center (contact distributor or manufacturer for list of Authorized Service Centers). It is recommended that an annual
inspection be done by qualified personnel. Replace worn or damaged parts with Hein-Werner Authorized Replacement
Parts only. Labels and owner’s manuals are available from manufacturer.
PRODUCT DESCRIPTION
Hein-Werner hydraulic wheel dolly is designed to facilitate the removal and installation of pneumatic tires and wheel as-
semblies found on many trucks, buses and trailers. This is
NOT
suitable for use as a wheel and tire puller. It is designed
only for use in removing up to rated capacity tire and wheel assemblies which are
not
bound and/or seized up at the
brake drum or hub assemblies. This device is designed to be used in conjunction with jacks and jack stands.
•
Study
,
understand and follow all instructions before operating this device.
•
Do not exceed rated capacity.
•
Use only on hard, level surfaces.
• Apply load as close to the vertical position of the lifting member as possible.
•
Before moving, lower load to lowest possible point
• Before moving, assure that the load is centered and secured with a load restraint device.
•
No alterations shall be made to this product.
•
Failure to heed these markings may result in personal injury and/or property damage.
WARNING
!
Figure 1 - Wheel Dolly Components
Caster
Front Wheel
Hydraulic Unit
Hydraulic
Unit Handle
Restraining
Chain
Frame
Tilt Handle
Lifting Arms
