3
OPERATION
WARNING:
Use only manufacturer provided attachments and accessories. Ensure all attachments are properly
secured. When using bearing punches and other adapters, center the load on the workpiece.
1. Using hardware included in kit, attach two (2) supplied
wedges to the Fuller Transmission Adapter.
2. Using transmission hardware, attach the adapter to trans-
mission housing as shown in Figure 1.
3. Using hardware included with HW93718, loosely attach
third wedge, with adjustable support rod, to transmis-
sion jack lifting plate as shown in Figure 2.
4. Raise transmission jack platform to contact wedges, ad-
just support rod on third wedge as necessary, and attach
wedges to plate as shown in Figure 3. Tighten all fasten-
ers. Transmission and PTO may now be removed from
truck.
Figure 1
Figure 2
Figure 3
!
