Operation
12
Operation
Place vessels
Caution:
Risk of breakage and spillage
If the vessels are not placed securely they may slip off and spill the sample.
Prior to start mixing ensure that all vessels are securely placed.
Accessories for round flasks and beakers are available.
➜
To place a number of vessels securely on plate use optional adaptors (see general
catalogue).
➜
Single vessels with flat bottoms like beakers may be placed directly on magnetic
plate.
A single flask should be arranged in the middle of the shaker plate.
Several flasks should be distributed equally on the plate.
Start mixing
Warning:
Risk of injury!
Returning power after a power cut off will restart mixing mode. There is
a risk of injury in the vicinity of moving parts of device.
Before working with the device or in the vicinity ensure all controls are
switched to “0” or “OFF” mode, when device is passiv.
When using device inside conditioning cabinets, make reference to
ambient conditions as stipulated in chapter “Technical data”.
Set speed and start rotation
Warning:
Risk of poisoning!
Open vessels and too high speed may result in samples splashing.
Use vessels with narrow neck especially if sample is dangerous or
toxic.
Adjust speed step by step until you have reached the required rpm
settings.
Wear safety glasses and especially with dangerous and toxic samples
appropriate protective clothing.
Place vessel with sample and stirring bar on magnetic plate.
➜
Turn item on with ON/OFF switch.
➜
Set speed with analog knob.
✓
Rotation starts immediately.
