manualshive.com logo in svg

Heidolph 505-20000-00, Руководство по эксплуатации, Страница: 30 / 36

Поделиться
Скачать
Heidolph 505-20000-00 Скачать руководство пользователя страница 30

Disassembly and Storage

30

Disassembly and Storage

 

Dismantling, transportation and storage

Dismantling

Warning: 

Risk of injury! 

While the device is plugged in you might be at harm if the device is 

accidentally switched to ON mode.
Prior to dismantling switch the device off and pull the plug from the 

electric socket. Ensure that the device is not switched on again.

 

✓

The device is switched off.

 

➜

Disconnect plug from power socket.

 

➜

Disconnect plug from socket on the device.

 

➜

Remove all vessels.

 

➜

Disassemble attachments.

Transportation and storage

 

➜

Store and transport the device and its components only if they were emptied and 

cleaned,

 

➜

Store and transport the device and parts of device in the original packing material or 

alternatively in an adequate container to prevent damages. 

 

➜

Seal the packing carefully against unauthorized or mistaken opening. 

 

➜

Store the device in a dry and frost-free place. 

Improper storage and transportation may result in damages to the 

system and the mechanical components. 
Avoid any kind of shocks during transportation.

Содержание 505-20000-00





































Отзывы:

Нет отзывов