HEIDENHAIN TNC 620 Programming Station, Руководство пользователя

Страница: 324 / 695

Programming Q parameters
9.1 Principle and overview of functions
9
324
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016
9.1 Principle and overview of functions
With Q parameters you can program entire families of parts in a
single NC program by programming variable Q parameters instead
of fixed numerical values.
Use Q parameters for e.g.:
Coordinate values
Feed rates
Spindle speeds
Cycle data
With Q parameters you can also:
Program contours that are defined through mathematical
functions
Make execution of machining steps depend on certain logical
conditions
Q parameters are always identified with letters and numbers. The
letters determine the type of Q parameter and the numbers the
Q parameter range.
For more information, see the table below:
Q parameter
type Q parameter range Meaning
Q parameters: Parameters effect all NC programs in the TNC memory
0 – 99 Parameters for the user , if there are no overlaps with the
HEIDENHAIN-SL cycles
100 – 199 Parameters for system information on the TNC that can be read
by the NC programs of the user or by cycles
200 – 1199 Parameters primarily used for HEIDENHAIN cycles
1200 – 1399 Parameters that are primarily used with manufacturer cycles
when values are given back to the user program
1400 – 1599 Parameters primarily used as input parameters for manufacturer
cycles
1600 – 1999 Parameters for users
QL parameters: Parameters only effective locally within an NC program
0 – 499 Parameters for users
QR parameters: Parameters that are nonvolatile on all NC programs in the
TNC memory, i.e. they remain in effect even after a power
interruption
0 – 499 Parameters for users