HEIDENHAIN TNC 620 E, Руководство пользователя

Страница: 694 / 840

Positioning with Manual Data Input | Programming and executing simple machining operations
17
694
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
17.1 Programming and executing simple
machining operations
The
Positioning w/ Manual Data Input
mode of operation is
particularly convenient for simple machining operations or for
pre-positioning the tool. It enables you to write a short program,
depending on machine parameter
programInputMode
(no. 101201),
in Klartext or in ISO format and execute it immediately. The
program is stored in the file $MDI.
You can use the following functions for example:
Cycles
Radius compensation
Program section repetitions
Q parameters
The additional status display can be activated in the
Positioning w/
Manual Data Input
mode of operation.
NOTICE
Danger of collision!
Certain manual interactions cause the control to lose program
information affecting the mode and thereby to lose the so-called
contextual reference. After the loss of the contextual reference,
unexpected and undesired movements can occur. There is a
danger of collision during subsequent machining operations!
Do not perform the following interactions:
Cursor movement to another NC block
The jump command
GOTO
to another NC block
Editing an NC block
Modifying Q parameter values with the
Q INFO
soft key
Switching the operating modes
Restore the contextual reference via repetition of the required
NC blocks