HEIDENHAIN QUADRA-CHEK 30*4, Руководство по установке

Страница: 16 / 173

en
18
HEIDENHAIN | QUADRA-CHEK 3000 | Installation Instructions | 4/2016
1.4 Storage and distribution of the
documentation
These instructions must be kept in the immediate vicinity
of the workplace and must be available to all personnel
at all times. The operating company must inform the
personnel where these instructions are kept. If the
instructions have become illegible, the operating company
must obtain a new copy from the manufacturer.
If the product is handed over or sold to a third party, the
following documents must be given to the new owner:
Addendum, if supplied
Installation Instructions
Operating Instructions
1.5 Target group for the instructions
The Installation Instructions must be read and observed
by every person who performs any of the following tasks:
Mounting
Installation
1.6 Notes in this documentation
Safety precautions
Comply with all safety precautions indicated in
these instructions and in your machine tool builder's
documentation!
Precautionary statements warn of hazards in handling the
product and provide information on their prevention. They
are classified according to the severity of the danger, and
are divided into the following groups:
DANGER
Danger indicates hazards for persons. If you do not
follow the avoidance instructions, the hazard will result
in death or severe injury.
WARNING
Warning indicates hazards for persons. If you do not
follow the avoidance instructions, the hazard could
result in death or serious injury.
CAUTION
Caution indicates hazards for persons. If you do not
follow the avoidance instructions, the hazard could
result in minor or moderate injury.
NOTICE
Notice indicates danger to material or data. If you
do not follow the avoidance instructions, the hazard
could result in things other than personal injury,
like property damage
.
Informational notes
Observe the informational notes provided in these
instructions to ensure reliable and efficient operation of
the product.
In these instructions, you will find the following
informational notes:
The information symbol indicates a tip .
A tip provides important additional or
supplementary information.
The gear symbol indicates that the function
described
depends on the machine, e.g.
Your machine must feature a certain
software or hardware option
The behavior of the functions depends on
the configurable machine settings
The book symbol represents a cross
reference to external documentation, e.g. the
documentation of your machine tool builder or
other supplier.