9
Settings required in the HEIDENHAIN control:
After mounting the QAN 200 U, permanent changes to the machine parameter list and possibly entries
in the motor table of the HEIDENHAIN control are required.
1. Press the EMERGENCY STOP button!
2. Switch on the main switch of the machine.
3. Do NOT confirm the "Power interrupted" message at the control!
4. Call the machine parameter list.
5. Call the motor table of the HEIDENHAIN control.
Select the motor according to the table below and, in the machine parameter "Type of motor"
(iTNC 530: MP 2200.x), assign it to the spindle the motor of which you have replaced .
Further information can be found in the Technical Manual of the respective
HEIDENHAIN control.
If you have any questions, contact the machine tool builder or HEIDENHAIN.
Defective
QAN 3 U / QAN 3 US
ID 316008-01
ID 316008-03
ID 316008-31
ID 316008-33
ID 316008-37
ID 316008-38
ID 316008-53
ID 344516-13
Replacement QAN 200 U
ID 374330-67
ID 374330-68
ID 374330-61
ID 374330-63
ID 374330-67
ID 374330-68
ID 374330-73
ID 374330-73
MP entry
QAN-200U-9000
QAN-200U-9000
QAN-200U-9000
QAN-200U-9000
QAN-200U-9000
QAN-200U-9000
QAN-200U-10000
QAN-200U-10000
