HEIDENHAIN ACU-RITE SENC 125 EACU-R, Справочное руководство, Страница: 10 / 24

Mounting options can be adapted to machine mounting surfaces
using spacers, standoffs, leveling set screws. A spar can be used
for the SENC 125 E encoder.
• Measuring length and mechanical configuration of your
machine determine your options.
• Fastener lengths described on this page are included with the
encoder or the backup spar.
• Mounting can be direct to the machine surface or with the aid of
leveling blocks or spacers. • For use with SENC 125 E scale case only (see page 7).
Mounting Requirements SENC 125 T/E
SENC 125 T
1/4-20 x 1/2” BHCS
& M6 Flat washer
Backup spar or center support mounting for SENC 125 E
encoders only
• Mounting can be direct to the machine surface or with the aid of
leveling blocks, spacers or back up spar.
M4 x 8mm SHSS
SENC 125 E
M5 Flat washer
10-32 x 1-1/4” SHCS
M3 x 8mm SHSS (3)
8-32 x 1” SHCS (2)
1/4-20 x 1/2” BHCS (2)
8-32 x 1” SHCS (2)
M3 x 8mm SHSS (3)
M6 Flat washer x .017” thk. (2)
Mounting hole cover (2)
Center Support
1/4-20 x 3/4” BHCS
1/4 Flat
washer
8
ACU-RITE
®
628136-21_Ve00_SENC125T-E.indd 10 10/22/2009 1:54:22 PM