HEIDELBERG HRA 2 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 50

HEIDELBERG HRA 2 Скачать руководство пользователя страница 15

11

4 General Operating Information

4.1 Turning the Instrument On and Off

4.1.1 Turning On

To turn the Heidelberg Retina Angiograph 2 on, proceed as follows:
(1) Turn the computer on. After the boot sequence has been completed, the computer will start

the Windows operating system.

(2) Turn on the power supply. The power switch is located on the front panel of the power sup-

ply. The 'off' position is marked O.

(3) Use the Heidelberg Eye Explorer shortcut on the desktop to start the application.
This will start the Heidelberg Eye Explorer software.

Note:

It is not recommended to turn the instrument on and off frequently. Even if you are

not using the instrument constantly during the course of a day, it is best to turn it on

in the morning and not to turn it off again until the evening.

4.1.2 Turning Off

To turn the Heidelberg Retina Angiograph 2 off, proceed as follows:
(1) If the acquisition dialog is open and the live image is visible on the screen, stop the image

acquisition with the 'freeze' button on the touch panel and leave the acquisition dialog.

(2) Turn off the power supply. The power switch is located on the front panel of the power sup-

ply. The 'off' position is marked O.

Important!

Never turn off the power supply while the laser scanning camera is acquiring im-

ages. This can result in damage to the camera.

Never turn the computer off without quitting the Heidelberg Retina Angiograph 2

operation software first. This can result in the loss of data stored on the com-

puter's hard disk. Before you turn off your computer, select "Shut Down" from

the Windows "Start" menu.

4.2 Controls

4.2.1 Touch Panel

«
...
13
14
15
16
17
...
»

Содержание HRA 2



















































Отзывы:

Нет отзывов