Heicko ERSDC1038-02-BI, Инструкция по установке и эксплуатации

Страница: 29 / 30

7.8 Enable / Disable step function
7.9 Disable radio communication
When the radio link is disabled, previously set motor functions as well as the emitter codes are retained and only the radio reception is disabled.
This prevents undesired settings on other motors.
x2 x2
Briefly press P1 to
enable the radio reception.
Press P1
for 6 seconds
-29-
HRSDC-ERSDC-BI_10.01_EN
7.10 Resetting to factory default
x4
Press P1
for 14 seconds
x4
Press P1
for 2 seconds
x1 x2
Option 3
Press „Stop“
for 1 second
B
By the same procedure
the added emitter can also be
deleted.
x3 x1
0
1
Press either the "Up" or "Down" button for a short
movement (release within 2 seconds), press one of
the buttons for more than 2 seconds and the motor
will start to run continuously.
Press „Up“ and „Down“
simultaneously for 5
seconds
+
x1
Press „Stop“
for 1 second
= Step function enabled
= Step function disabled
(continuos mode active)
x1
x1
x2 x3