Figure 2 Figure3
To turn the headset on
Press and hold the Call Handling Button(MFB) for approximately 2 seconds until you hear a short
low tone followed by a short high tone. The headset indicator light flashes yellow.
When turned on, the headset automatically establishes handsfree phone and streaming music
connections with the last connected Bluetooth devices (phone and/or music devices).
To turn the headset off
Press and hold the Call Handling Button(MFB) for approximately 5 seconds until will hear a short
high tone followed by a short low tone. The headset indicator light switches off.
To pairing the headset with a phone
Before using the headset,you should pair the headset to a phone.
Turn the headset on,then press BUTTON_PAIR, the indicator light yellow and red flashes
alternately.
Operate the phone to discover and connect the headset. The headset passkey is 0000. If pairing
success the headset indicator YELLOW light flashes slowly and indicator red light is off. Pairing,
done only once. Each time you use your headphones, it will be automatically connected to your
phone.
Note:Before enter pairing mode,please make sure other BlueDevices are closed.
Using the headset
Listening to music
Your headset allows you to listen to music from your Bluetooth streaming music source.
Note:
When placing or receiving calls, music playing from a Bluetooth music source is
automatically paused. When the call is finished, music playing is resumed.
Charging Port
Charging Port Rubber Cover
Charging Plug