TRANSPORT AND SHIPMENT
When packing the amplifier for shipping, please follow these instructions to avoid damaging the unit:
1. Put the plastic bag around the amplifier. Make sure the plastic bag does not press tightly on the knobs
as this may damage them during transport.
2. Place one of the shock absorbers on the floor, inside facing up.
3. Lift the H80, holding on to the center of the back and front panels, avoiding the volume knob and input
selector button, so they do not get damaged.
4. Carefully insert the H80 sideways into the shock absorber.
5. Place the second shock absorber on the opposite side of the amplifier.
6. Lift the H80, holding on to the center of the back and front panels, avoiding the volume knob and input
selector button, so they do not get damaged. Ensure the shock absorbers remain firmly fitted onto the left
and right sides of the amplifier.
7. Place the H80 in the box.
8. Check that the plastic bag is loose around the volume and source knobs to avoid any damage to
the knobs during transport. It should not be pulled tight across the volume and source knobs.
CLEANING
Fingerprints or stains on the front panel or top cover can be removed with a damp cloth which has been
slightly moistened with warm water or a mild detergent suitable for cleaning mirrors and windows. At no
time should liquid cleaners be sprayed or applied directly on the amplifier, as direct application of liquids
may result in damage to electronic components within the unit.
TECHNICAL SPECIFICATIONS
Power output: 75W + 75W into 8 Ohms
Analog Inputs: 1 balanced (XLR), 2 unbalanced (RCA)
Digital Inputs: 2 coaxial S/PDIF, 2 optical S/PDIF, 1 USB
Frequency response: 5Hz-100kHz
Signal-to-noise ratio: More than 100dB
Crosstalk: Less than -100dB
Distortion: Less than 0.01% @ 50W 8 Ohms 1kHz
Intermodulation: Less than 0.01% (19kHz + 20kHz)
Damping factor: More than 1000 (main power output stage)
Dimensions: 3.15” x 16.93” x 12.20” (HxWxD), 26.46 lb (shipment weight)
Dimensions: 8cm x 43cm x 31cm (HxWxD), 12kg shipment weight.
