Mute
. When the mute button on the RC2 remote control is pressed the speaker outputs and PreOut 1 &
2 outputs are muted. A flashing volume number in the display indicates mute is on. To switch mute off
press the mute button on the remote control one more time, press any of the volume buttons on the
RC2 remote control or turn the volume adjustment knob up or down.
Home Theater
. The Home Theater input is a maximum volume line level input with the volume
setting permanently set at maximum volume step 99. This input is available for connecting the H200 to
a surround processor with internal adjustable volume.
Do not
connect input sources such as CD-
players, DVD-players or similar signal sources to the Home Theater input. If connecting a fixed level
CD-player directly to the Home Theater input severe damage can be done to amplifier and connected
loudspeakers.
Always connect input / output audio cables and power cable when the amplifier is powered OFF.
After the amplifier is switched on, there is a delay of some seconds for the music signal to reach the
speaker outputs.
To get the best sound possible we recommend to use the H200 amplifier with a high quality sound
source, a very good choice would be one of the Hegel CD players. The resolution of the Hegel H200 is
so high that the best possible combination will be to use a CDP4A together with the H200.
