Hegel H190, Руководство пользователя

Страница: 17 / 20

17
Display On/Off
The DISP button on the RC8 remote control
may be used to turn the display of the H190
on or off. Hold the DISP button for more
than 1 second to turn the display off.
Press the button turn the display on.
Home Theater or Standard Analog Input
All inputs can be changed into a Home
Theater input. This will set the Volume at a
fixed high volume level. Use the RC8
remote to change the settings. Hold
computer play until the setup menu
appears. Use computer prev/next to
navigate to “HT” and press computer play
to select this submenu. Now use computer
next/prev to maneuver to the input you want
to change into a fixed level input. Press
computer Play to toggle between a fixed
level input or normal variable input. Now
don’t press anything for 15sec, and the
H190 will return to normal mode.
WARNINg: Activating Home Theater sets
the volume at a high fixed level. This may
harm your speakers if a fixed level input is
connected.
Set Power Up Volume
A user defined volume value may be used as
the power-up volume. The current volume is
set as the power-up volume by pressing and
holding the DAC+ button while pressing Vol-
on the RC8 remote control.
Reset to Factory Default Settings
By pressing and holding the DAC+ button
while pressing Mute on the RC8, the H190
will be reset to factory settings. This will
clear all user defined settings, including IP
settings, and reinitialize the H190.
Max Volume
A user defined volume value may be used as
the max volume.
The current volume is set as the max volume
by pressing and holding the DAC+ button
while pressing Vol+ on the RC8 remote
control. To reset, put to max voulme, press
and holding the DAC+ button while pressing
Vol+ on the RC8 remote control.
Using the USB Connection:
When you connect H190 to a computer
with a USB cable (not included), the H190
will automatically install itself as a USB
soundcard on all newer versions of Win-
dows and MAC OS X, and most newer
versions of Linux.
When your computer is connected with
the USB-cable you may use the supplied
remote control to skip/play/pause in most
media players.
The first time you connect your computer to
H190: Connect the computer to the internet
and close all media players, such as iTunes
or Windows Media Player.
Troubleshooting with MAC:
H190 connected but no sound out of the
speakers: go to System Preferences –
Sound – Output and select “TE7022 Audio
w/ SPDIF” as the Output Device.
24 bit Audio:
H190 can receive 24-bit music files through
the USB interface. Sending 24-bit audio sig
-
nals, from your computer, may require some
set-up in your media player. Setup varies
depending on the operating system and the
media player. Consult the FAQ section of the
media player for details.
CD-quality and lower resolution files:
No additional set-up is needed.
Special Functions