TRANSPORT AND SHIPPING OF AMPLIFIER
If you are packing the amplifier for shipping please follow these instructions to secure the volume and
source knobs are not damaged in transport:
1.
Put the plastic bag around the amplifier, putting the bag on from the front panel side of the
amplifier. Leave about 10cm of open room between bottom end of plastic bag and volume and
source knobs, making sure the plastic bag bottom end will not touch the knobs during transport.
2.
Insert the amplifier in the two white shock absorbers, one in the left side and one in the right side
of the amplifier. It will be most easy to fit the left hand side shock absorber first by putting the left
hand side shock absorber down on the floor and putting the amplifier down into the shock
absorber. Hold the amplifier firmly in the middle of the front panel and the middle of the back
panel and be careful to not hold around the volume and source knobs. Then put the right hand
shock absorber on the amplifier.
3.
Insert the amplifier into the cardboard box by first lowering the front panel side against one side of
the cardboard box. Then lower the back side of the amplifier into the cardboard box.
4.
Make sure the plastic bag is still loose around the volume and source knobs to avoid any damage to
the knobs during transport.
CLEANING
The top cover, side panels and knobs are made of brushed / blasted and anodized aluminum, while the
front panel is made of solid, powder coated aluminum. Fingerprints or stains on the front panel, knobs
or top cover can be removed with a cloth moistened with warm water or with a mild detergent suitable
for cleaning mirrors and bathroom.
We have found that the detergent Bio-Tex OXI effect supplied in an orange plastic spray can is
working particularly well in cleaning the front panel, top cover and side panels.
We wish you good luck in setting up and connecting your new amplifier and hope that it will give you
many years of joyful natural sounding music experiences!
