HECKLER H573 Скачать руководство пользователя страница 2

2

This product hangs overhead in a commercial setting and is installed to 
directly to the structure of the room. Therefore, this product should be 
installed by a professional.
The fasteners provided to install the mount to the ceiling tile are provided 
for your convenience and are suitable for most conventional ceiling tiles. 
However, a professional should determine if the hardware provided is 
suitable for your specific installation.
 Use the support bracket provided in all ceiling tile installations. Failure to 
use this bracket could result in structural failure of the ceiling tile.
This product is designed for ceiling tiles that are 24 inches wide or 24 inches 
long, or 24 inches square. Do not use this product with ceiling tiles that do 
not have these specifications.
The USB extender should be installed within the body of the mount, below 
the ceiling tile. The USB extender should not be positioned in the air plenum 
above the ceiling tile

1.

2.

3.

4.

5.

To reduce the risk of severe injury or death to persons, 
review these installation safety steps before proceeding:

Содержание H573
















Отзывы: