Airborne 360° Air purifiaction system
15
EN
Automatic mode
In automatic mode, two separately programmable on/off cycles are
available to the operator. Engaging automatic mode is done by multiple
pressing the button until the MANUAL field is reached. Then, press
to
select AUTO and confirm with the button .
Programing the on/off cycles is done by sequential selection of the fields
with the button
selecting values with the buttons
or
and final
confirmation with the button .
The return to Manual mode is performed by successively passing through
all the fields, by pressing the button until the AUTO field is reached. Then,
press
to select MANUAL and confirm with the button .
Turn on/off is always available by the main switch on the back of the lamp.
During the next power-up, the lamp initiates the last selected mode of operation
– MANUAL or AUTO.
Whenever the lamp is not operated in AUTO mode, it is recommended to unplug it
from the mains.
Whenever the lamp is stored away for long periods it is recommended to unplug it
from the mains.
