ASSEMBLY INSTRUCTIONS (CONT.)
5. Place the two BENCH SUPPORT HEATER PANELS into place as shown, one on each side, against the BACK
PANEL between the wood strips. Then insert FRONT SMALL BENCH SUPPORTS on either side of front, as shown,
and attach with
(2 ea.) 2” SCREWS
.
6. Plug in all bench heater plugs into wires from back wall. Make sure connections are tight.
Attach the BENCH
SEATS with (2 ea.) 2” SCREWS in pre-drilled holes into BENCH SUPPORTS.
4. Place the RIGHT PANEL on the FLOOR in the same manner and buckle it to the BACK PANEL as you did in Step 3.
NOTE: the BENCH SEATS
may be installed after the
FRONT PANEL in attached
in Step 7.
6
