M U N I C H H O M E S Y S T E M S
Technomac Sp. z o.o.
•
ul. Spadowa 3
•
04-669 Warszawa
CARE, MAINTENANCE AND SERVICE
Before cleaning and maintaining your HEATSCOPE
®
, disconnect it from the power supply or, if buried
cables are used, switch it off via the omnipolar switches. Ensure that the unit has cooled down – wait at
least 30 minutes after the last use before you start cleaning it.
All surfaces should be cleaned using a damp cloth only. Never use cleaning products containing alkaline
substances such as sodium hydroxide or soap, surfactants or solvents such as alcohol. Use only a very
soft cloth or a brush for the reflector and the heating elements.
REMOVAL FROM SERVICE / DISPOSAL
When the unit reaches the end of its life, it must be removed from service by a specialist in accordance
with the relevant regulations and steps must be taken to ensure that it cannot be put into use again.
The unit must be disposed of professionally and in an environmentally friendly manner. The relevant legal
regulations must be observed.
GUARANTEE AND WARRANTY
The HEATSCOPE
®
is guaranteed for 24 months. The warranty period begins with the date on which the
new unit was purchased. Expendable parts or defects that affect the usability of the unit only slightly are
not covered by the guarantee. When making a guarantee claim, you must provide the original invoice
showing the date of purchase and the unit model.
PROCESSING OF GUARANTEE CLAIMS
Please contact your dealer/distributor before returning the defective unit along with valid proof of
purchase and a detailed description of the fault. Please note: Don‘t send in any devices to the manu-
facturer without any former contact with your distributor or dealer. He will inform you about all follwoing
steps. The manufacturer will only accept the unit, if it is returned with adequate transport packaging
which protects it securely during transport.
The manufacturer will, at his own discretion, fulfil his warranty obligations by either repairing or ex
-
changing the faulty unit or individual parts of the faulty unit. If a unit is replaced, the shape and colour of
the new unit may vary slightly from the original one. The original date of purchase shall determine when
the guarantee period begins. The guarantee period shall not be extended if the unit was replaced or
repaired by the manufacturer.
EN
