Heatrae Sadia Megaflo Eco 125DD Скачать руководство пользователя страница 37

37

note) and date of supply is submitted when making a claim.
      

•  The Megaflo product has not been affected by any cause 

beyond our reasonable control including, without limitation:  

an act of God, explosion, flood, fire or accident; war or civil 

disturbance; strike, industrial action or stoppages of work; 

any form of government intervention; a third party act or 

omission including theft or malicious damage; failure by 

you to give us a correct delivery address or notify us of any 

change of address.
    

.

If any of the following situations occur, the Megaflo  Lifetime 

Warranty* will not apply:

•  Any wilful or accidental damage caused by your 

negligence

•  Damage caused as a result of scale.

•  Installation not  in line with the installer and user manuals 

provided, 

•  Failure to comply with installation instructions (whether 

oral or in writing), 

•  Misuse of the Megaflo product or alteration of the 

Megaflo product not in accordance with the requirements 

set out above.                                                                                                       

•  Defects which are not  reported to us outside of the 

warranty period on 0344 8711535 or Megafloservice@baxi.

co.uk

•  Any third party repair or replacement costs unless those 

costs have been agreed and authorised by Baxi Customer 

Support or Heatrae Sadia in writing prior to incurring the 

costs.

•  In relation to the Megaflo Commercial Lifetime Warranty 

only, we will not be liable for any indirect and consequential 

losses and any loss of earnings, loss of business, or losses 

in relation to stress and inconvenience, howsoever caused. 

Claims

Defects should be reported to us as soon as you are aware 

of them.  Please report defect to us by contacting 0344 871 

1535 or [email protected] .

Notes
We are only able to carry out warranty repair/replacement 

to Megaflo solar collectors which have safe access and 

that meet current Health & Safety working at heights 

requirements. The customer will cover the cost of any 

safety equipment including but limited to scaffolding and 

lifting equipment that is required to meet this standard and 

will appoint a contractor to carry this work out.

Heatrae Sadia accepts no liability for any third party 

damage. 
These warranties do not affect your statutory rights and 

remedies in relation to the Megaflo products.

Annual service

Annual services are available from Baxi Customer Support, 

the service division of Heatrae Sadia. 
Please contact Baxi Customer Support on 0344 871 1535 

for details.

*In domestic† properties, lifetime is the period during which 

the first owner of the Megaflo or new build home continues 

to own the property. Should the property be sold, the new 

owner and any subsequent owners will receive a 30 year 

warranty from the date the original owner purchased the 

Megaflo or new home with a Megaflo installed. In non-

domestic properties lifetime is a period of 30 years from the 

date of purchase by the original owner and is transferable 

to any new owner of the property.

†Domestic is any premises not being, or ever having been, 

wholly or partly utilised for business purposes.

^Non-domestic premises are any premises other than 

those defined as Domestic.†
All Megaflo warranties are conditional on the installation 

being carried out in accordance with the installation 

instructions supplied with the product. These warranties do 

not affect your statutory rights.  Full terms and conditions 

of these warranty packages are available on request or via 

www.heatraesadia.com/Megaflo

 

Heaatrae Sadia*, Hurricane Way, Norwich, Norfolk, NR6 

6EA

Megaflo may introduce modifications to their products 

from time to time. Consequentially the details given in this 

brochure are subject to alteration without notice.

Contacts

Specification Advice Hotline

T: 01603 420220
F: 01603 420229

E: [email protected] 

www.heatraesadia.com

* Heatrae Sadia is a trading name of Baxi Heating UK 

Limited, Brooks House, Coventry  Road, Warwick, CV34 

4LL

Содержание Megaflo Eco 125DD









































Отзывы: