Errors
Settings water or ambient temperature
Errors
Max heating temperature,
selection for 1/2/3 hours
Off selection
TURBO mode activation
3
sec
+
–
TURBO mode activation
- max heating temperature
Hold button for 3 seconds
4
Run the heater controller
via remote controller
Hold upper button
for 3 seconds
Switch off the controller
via remote controller
Hold lower button
for 5 seconds
40˚C
Standard heating
temperature
3
sec
5
sec
2
10˚C - 65˚C
*
Select temperature
+
–
3
DO NOT DISCONNECT!
controller from heating element, when connected
to the power supply
Lack of water (or wrong choice
of heating element to the heater)
Damaged heating element
(or no power cuircit)
No communication to the remote
controller if paired
Press twice
upper and lower
button together
2x
2x
Temperature selection.
+
–
The remote is
a temperature sensor
* maximum temperature can be different
according to the producer settings
Water
temperature
10-65˚C
*
Ambient
temperature
10-30˚C
DOWNLOAD APPLICATION
SUPLA.ORG
Install the application on your devices.
The app will easily guide you through
individual installation steps.
[ 9 ]
