background image

16

15

TouchScreen 

Series

Model:  

DT-TS / DT-NTS

Feature 06 – Communication Address:

 This setting is used when you have 

connected your thermostat to a network system. Each thermostat on the network 

must have a unique communication address. This can be set from 01-32.

Feature 07 – Temperature Up/Down Limit:

 This function allows you to limit the use 

of the up and down keys. This limit is also applicable when the thermostat is locked 

and so allows you to give others limited control over the heating system.

To adjust the optional settings, follow these steps.

• 

Press SETUP ..................................................................................................................

• 

Use the Up/Down keys at the top of the screen to select the feature 

number (shown on page 17) and then use the Up/Down keys in the 

center to adjust the setting ....................................................................................

• 

Press DONE to confirm settings and exit ...........................................................

Adjusting the Optional Settings

Feature Number

Setting Value

Optional Features Continued

Содержание TouchScreen DT-NTS














Отзывы: