Heatmiser PRT-ETS WiFi, Руководство по эксплуатации

Страница: 6 / 32

4
Step 6:
You need to enter the IP address of your gateway
and DNS. In most cases, this is the IP address of your
wireless router.
Step 7:
Browser Username & Password
You should now create a username and password that is
used when you access your thermostat from a web browser.
The default username is admin and the default password is
also admin.
Access PIN
The access PIN is required when you are using the iPhone
app and helps secure your system. This PIN should be
entered in the Network Setup screen.
Step 8:
Checking Connection
Once you have entered the details of your Wi-Fi network
press Apply and disconnect your thermostat wait 5 seconds
then reconnect it. Once the thermostat has rebooted wait
approximately one minute, you should then see the Wi-Fi
symbol on the display indicating the Wi-Fi Thermostat
has successfully connected to your network. The Wi-Fi
symbol is 3 curved lines just below the OFF button.