Heatmiser PRT-EN1 Slimline Series, Руководство пользователя

Страница: 6 / 15

10 9 Slimline
Series Model
: PRT-EN
Temperature Display
This thermostat can be setup to use an air sensor, floor sensor or both.
The display will clearly show which sensor is being controlled by showing either:
Note: Built in air sensor only MUST NOT be used to control electric underfloor heating.
Floor sensor only or built in air & floor sensor together must be used.
When the thermostat is set to use both sensors, the room temperature will be displayed.
To view the floor temperature, press and hold the key until the Floor Temp is
displayed on screen.
Room Temperature Floor Temperature
Setting the Clock
To set the clock, follow these steps.
• With the thermostat turned ON, press the Clock key twice .................................
• Use the Up/Down keys to set the hours ..............................................................
• Press H to confirm settings ................................................................................................
• Use the Up/Down keys to set the minutes .........................................................
• Press H to confirm settings ...............................................................................................
• Use the Up/Down keys to set the day of the week ..........................................
• Press A to confirm settings and return to main display ..........................................
Day
Hours
Minutes