Heatilator • RBV4236/RBV4842 • 4048-210 • Rev S • 6/10
33
I. Glass Door Assembly
WARNING! Risk of Asphyxiation!
Handle glass doors
with care. Inspect the gasket to ensure it is undamaged
and inspect the glass for cracks, chips or scratches.
•
DO NOT
strike, slam or scratch glass.
•
DO NOT
operate fireplace with glass removed, cracked,
broken or scratched
.
• Replace as a complete assembly.
J. Install Hood
The hood is shipped on top of the outer shell of the appli-
ance. Remove the hood from its shipping location. Locate
the four hood retaining clips and slide the hood into them.
The hood must be attached or a fire hazard may result.
See Figure 14.19.
Figure 14.19 Installing the Hood
Note:
Glass doors are not optional in the Commonwealth of
Massachusetts. They are required.
Screws for DM Door Installation
Figure 14.17 Pins & Screws for DM Door Installation - Reveal
• DM1036 or DM1042 door installation on the RBV4236
or RBV4842 requires longer pins. The longer pins and
screws to attach them are located on the valve bracket
of the appliance. See Figure 14.17.
Figure 14.18 Install Pins
• Remove the shorter door pins using a phillips
screwdriver and replace them with the longer pins. See
Figure 14.18.
WARNING! Risk of Fire or Asphyxiation!
Appliances
equipped with optional glass doors must be operated with
doors fully open or fully closed.
• Use glass doors certified for use with this appliance.