manualshive.com logo in svg

Heatilator NNXT33-IFT, Руководство пользователя, Страница: 23 / 28

Поделиться
Скачать
Heatilator NNXT33-IFT Скачать руководство пользователя страница 23

23

Heatilator  •  NNXT33-IFT, NNXT33L-IFT, NNXT36-IFT, NNXT36L-IFT Owner’s Manual  •  2628-981 Rev. D  •  1/21 

6 

6 

Reference Materials 

 

A. Accessories

Install approved accessories per instructions included 

with accessories. Contact your dealer for a list of ap-

proved accessories.

WARNING! 

Risk of Fire and Electric Shock! 

Use ONLY 

Hearth  &  Home  Technologies-approved  optional  acces-

sories  with  this  appliance.  Using  non-listed  accessories 

could result in a safety hazard and will void the warranty. 

Factory-Installed Fan

The NNXT models include a factory-installed fan.  Follow 

the instructions included with the appliance remote con-

trol to operate the fan.  Contact your dealer if you have 

questions.

Decorative Barrier Doors and Fronts

WARNING!  Risk of Fire! 

Install ONLY doors or fronts 

approved by Hearth & Home Technologies. Unapproved 

doors or fronts may cause appliance to overheat.

DO NOT operate the appliance with the barrier removed. 

Contact your dealer or Hearth & Home Technologies if the 

barrier is not present or help is needed to properly install 

one.
For more information refer to the instructions supplied 

with your decorative barrier door or front.

Heat Management Systems              

The optional heat management systems compatible with 

this product are discussed in Section 3.I.  

After a qualified service technician has installed the heat 

management system, follow the instruction supplied with 

the  kit  for  operation.    Contact  your  dealer  if  you  have 

questions.

Remote Controls, Wall Controls and Wall

Switches

After a qualified service technician has installed the re

-

mote control, wall control or wall switch, follow the in-

structions supplied with the control installed to operate 

your appliance:
For safety:

•  Install a switch lock or a wall/remote control with child 

protection lockout feature.

•  Keep remote controls out of reach of children.
Contact your dealer if you have questions.

IntelliFire Wi-Fi Module with IntelliFire App

After a qualified service technician has installed the  Wi-

Fi module with IntelliFire app, follow the instructions sup-

plied with the control installed to operate your appliance.  

Contact your dealer if you have questions.

Содержание NNXT33-IFT





























Отзывы:

Нет отзывов