19
Majestic • MERID36IN, MERID36IL, MERID42IN, MERID42IL Owner’s Manual • 2517-981 Rev. E • 1/19
Burner Identification/Verification
The burner may be accessed for identification and veri
-
fication purposes. This task should be performed by a
qualified service technician. Only the log/grate assembly
and burner skirt need to be removed in order to identify
burner. See Figure 4.3 for burner identification features.
MERID42IN/IL (NG & PROPANE)
MERID36IN/IL (NG & PROPANE)
Figure 4.3 Burner identification Examples
Optional Black Glass Refractory
Frequency:
Annually
By:
Qualified Service Technician
Tools needed:
Protective gloves, dust cloths, non-abra-
sive glass cleaner
CAUTION!
Handle fixed glass assembly with care.
Glass is breakable.
• Avoid striking, scratching or slamming glass
• Avoid abrasive cleaners
• DO NOT
clean glass while it is hot
•
Remove decorative front from fireplace and set aside
on work surface.
• Pull the four glass assembly latches out of the groove
on the glass frame. Remove glass assembly from the
appliance See Figure 4.1.
Note:
It may be necessary to remove logs in order to clean
and inspect the glass refractory. Reinstall logs using in-
structions included in appliance installation manual.
•
Clean black glass refractory with a non-abrasive
commercially available cleaner.
- Light deposits: Use a soft cloth with soap and water
- Heavy deposits: Use commercial fireplace glass
cleaner (consult with your dealer)
• Carefully set fixed glass assembly in place on fireplace.
Hold glass in place with one hand and secure glass
latches with the other hand.
• Replace the glass assembly on the appliance. Pull out
and latch the four glass assembly latches into the groove
on the glass frame.
• Reinstall decorative front.