background image

13

Heatilator  • HEIR36, HEIR42, HEIR50 Owner’s Manual  •    2285-981 Rev. H  •  5/15

B.  Maintenance Tasks - Homeowner

The following tasks may be performed annually by the 
homeowner.  If you are uncomfortable performing any of 
the listed tasks, please call your dealer for a service ap-
pointment.
More frequent cleaning may be required due to excessive 
lint from carpeting, bedding material, et cetera. It is im-
perative that control compartments, burners and circulat-
ing air passageways of the appliance be kept clean.  Any 
safety screen, guard, or barrier removed for servicing the 
appliance must be replaced prior to operating the appli-
ance.

CAUTION! Risk of Burns! 

The 

fi

 replace should be 

turned off and cooled before servicing. 

Any safety screen or guard removed for servicing must be 
replaced prior to operating the 

fi

 replace.

Installation and repair should be done by a quali

fi

 ed service 

technician only. The appliance should be inspected before 
use and at least annually by a professional service person. 

Maintenance and Service 

Task

Frequency

To be completed 

by

Glass Cleaning/
Exterior

Seasonally 

Homeowner

Decorative Fronts/
Surrounds

Annually

Remote Control

Seasonally

Venting

Seasonally

Glass Cleaning/
Interior

Annually

Quali

fi

 ed Service 

Technician

Gasket Seal and 
Glass Inspection

Annually

Log Inspection 

Annually 

Firebox Inspection

Annually

Control Compartment 
&  Firebox Top

Annually

Burner Ignition & 
Operation

Annually

A.  Maintenance:  Frequency and Tasks

Decorative Fronts, Surrounds

Frequency: 

Annually

By:  

Homeowner

Tools needed

:  Protective gloves, stable work surface

•  Assess condition of screen and replace as necessary.  
•  Inspect for scratches, dents or other damage and repair 

as necessary.

 

Check that louvers are not blocked.

 

Vacuum and dust surfaces.

Glass Cleaning 
(Exterior of Installed Glass Only)

Frequency: 

Seasonally

By: 

Homeowner

Tools Needed

:  Protective gloves, ceramic glass cleaner, 

drop cloth and a stable work surface.

WARNING!  Risk of Injury!  

Glass installation and re-

moval must be performed only by a quali

fi

 ed service tech-

nician.  

 

Homeowner may only clean outsides of glass.

•  Call your dealer for a service appointment to have inside 

of glass cleaned.

CAUTION! Glass is breakable.

•  Avoid striking, scratching or slamming glass
•  Avoid abrasive cleaners
• 

DO NOT

 clean glass while it is hot

•  Clean glass with a non-abrasive commercially available 

ceramic glass cleaner.

NOTICE! Use only glass cleaner compatible with ce-
ramic glass.  

Other types of glass cleaner may damage 

the glass surface when exposed to high temperatures.

-  Light deposits: Use a soft cloth with soap and water
- Heavy deposits: Use commercial fireplace glass 

cleaner (consult with your dealer)

When properly maintained, your 

fi

 replace will give you 

many years of trouble-free service.  

Contact your dealer 

to answer questions regarding proper operation, trou-
bleshooting and service for your appliance.  Visit www.
heatilator.com to locate a dealer.  We recommend annual 
service by a quali

fi

 ed service technician. 

Содержание HEIR36H






























Отзывы: