3
Heatilator • SIM-3630, SIM-3933, SIM-4236, SIM-4842 Decorative Front Instructions • 2382-930 Rev. B • 9/17
Cleaning Instructions for Decorative Fronts
Use a microfiber cloth and Windex® Original Glass
Cleaner or 03M003 Stove Bright® Glass Cleaner to
clean the decorative front immediately after installation
to remove acids deposited by the installer or technician.
Spray the cleaner onto the microfiber cloth and carefully
wipe the entire surface. The decorative front should
be cleaned in this manner annually by the homeowner
to remove fingerprints or other contaminants. Once
oxidation of the paint pigment has occurred, cleaning will
not restore the original color.
Please contact your Heatilator dealer with any questions
or concerns.
For the location of your nearest Heatilator dealer,
please visit www.heatilator.com.
Heatilator, a brand of Hearth & Home Technologies
7571 215th Street West, Lakeville, MN 55044
www.heatilator.com
1. Check that the hanging brackets are bent to an ap-
proximate 90 degree angle as shown in Figure 4.
Figure 5. Hang Decorative Front on Shoulder Screws
Figure 4. Hanging Hooks Bent Correctly
INSTALL THE SIMON DECORATIVE FRONT
(All Models)
UPPER
LOWER
SHOULDER SCREWS
2. Install the decorative front by hanging it on the four
shoulder screws on the appliance. See Figure 5.
Note:
It may be necessary to adjust the hanging brackets
slightly to make the decorative front hang squarely
in the appliance opening.
