Heatilator Gas Fireplace GBFL4136I Скачать руководство пользователя страница 5

5

Heatilator  •  GBST4336I, GBFL4136I  •  2135-900  •  2/08

B.  Limited Lifetime Warranty

Gas Appliance (Fireplace)
Limited Lifetime Warranty

HEARTH & HOME TECHNOLOGIES INC. (“HHT”)

 extends the following warranty for HEATILATOR® gas appliances installed 

in the United States of America or Canada (the “Appliance”). Dealers and employees of HHT have no authority to make any 
warranty or authorize any remedies in addition to or inconsistent with the terms of this warranty.  

Limited Lifetime Warranty

HHT warrants the Appliance for component failure due to a manufacturing defect of any of the following components: combustion 
chamber, burner pan, and logs. The Limited Lifetime Warranty specifi ed above is subject to the conditions, exclusions and 
limitations listed below, is for the period the Appliance is owned by the original homeowner only, and is nontransferable.

1 Year Limited Warranty

HHT warrants the Appliance to be free from failure of any of the following components for a period of one year after installation: 
valve,  fl exible gas line connector, glass panel, fan, direct vent chimney components, factory paint, gasket, piezo ignitor, 
thermopile, thermocouple, junction box, pilot assembly, shutoff valve, high limit switch, refractory liners, transformer, and control 
box. If the Heatilator Appliance is found to be defective in either material or workmanship within one year of the date of original 
installation, HHT will provide replacement parts at no charge and pay reasonable labor and freight costs, and is for the period 
of one year following the date of original installation of the Appliance.

Conditions, Exclusions, & Limitations of  Liability

A.  Both the Limited Lifetime and 1 Year Limited Warranties supplied by HHT apply only while the Appliance is in its location of   

original installation.  HHT’s obligation under this warranty does not extend to damages resulting from (1) installation, operation 
or maintenance of the Appliance not in accordance with the Installation Instructions, Operating Instructions, and the Listing 
Agent Identifi cation Label furnished with the Appliance; (2) installation which does not comply with local building codes; 
(3) shipping, improper handling, improper operation, abuse, misuse, accident or unworkmanlike repairs; (4) environmental 
conditions, inadequate ventilation or drafting caused by tight sealing construction of the structure, air handling devices 
such as exhaust fans or forced air furnaces, or other causes;  (5) use of fuels other than those specifi ed in the Operating 
Instructions; (6) installation or use of components not supplied with the Appliance or any other components not expressly 
authorized and approved by HHT; and/or (7) modifi cation of the Appliance not expressly authorized and approved by HHT in 
writing. This warranty is limited to only the component parts manufactured or supplied by HHT.

B.  HHT’s liability under both the Limited Lifetime Warranty and the 1 Year Limited Warranty is limited to the replacement and 

repair  of defective components or workmanship during the applicable period.  HHT may fully discharge all of its obligations 
under such warranties by repairing the defective component(s) or at HHT’s discretion, providing replacement parts at no 
charge and paying reasonable labor and freight costs.

C. EXCEPT TO THE EXTENT PROVIDED BY LAW, HHT MAKES NO EXPRESS WARRANTIES OTHER THAN THE 

WARRANTY   SPECIFIED HEREIN. THE DURATION OF ANY IMPLIED WARRANTY IS LIMITED TO DURATION OF THE 
WARRANTY SPECIFIED ABOVE.

D.  Some states do not allow exclusions or limitations of incidental or consequential damages, so those limitations may not apply 

to you. This warranty gives you specifi c rights; you may also have other rights which vary from state to state.

How to Obtain Service

To obtain service under this warranty you must:

1.  Send written notice of the claimed condition to Heatilator Technical Service Department, Hearth & Home Technologies, 1915 

W. Saunders Street, Mt. Pleasant, Iowa 52641-1563.  You may also register your claim online at www.heatilator.com.

2.  Provide proof of purchase, model number, serial number, and manufacturing date code to HHT.

3.  Provide HHT reasonable opportunity to investigate the claim, including reasonable opportunity to inspect the Appliance prior 

to any repair or replacement work and before the Appliance or any component of the Appliance has been removed from the 
place of original installation.

4.  Obtain HHT’s consent to any warranty work before the work is done.

ADDITIONAL INFORMATION: 

If you would like information on current HEATILATOR products or want to locate a dealer in your area, call 1-800-927-6841.

®2003 Heatilator® is a Registered Trademark of Hearth & Home Technologies Inc.

Содержание Gas Fireplace GBFL4136I















































Отзывы: