Heatilator Direct Vent Gas Appliance CD4236ILR Скачать руководство пользователя

Страница: 9 / 76

Heatilator • Caliber CD Series • 4040-263 Rev M • 06/08

Clear space 3 ft (914 mm)
in front of appliance

D. Clear Space

WARNING! DO NOT

place combustible objects in front of

the

replace or block louvers. High temperatures may start

re. See Figure 2.2.

Avoid placing candles and other heat-sensitive objects on
mantel or hearth. Heat may damage these objects.

Figure 2.2 Clear Space

C. Fan Kit (optional)

If desired, a fan kit may be added. Contact your dealer to
order the correct fan kit.

F. Fixed Glass Assembly

See Section 14.K.

E. Decorative Doors and Fronts

WARNING! Risk of Fire!

Install ONLY doors or fronts

approved by Hearth & Home Technologies. Unapproved
doors or fronts may cause

replace to overheat.

This

replace has been supplied with an integral barrier to

prevent direct contact with the

xed glass panel.

DO NOT

operate the

replace with the barrier removed.

Contact your dealer or Hearth & Home Technologies if the
barrier is not present or help is needed to properly install
one.

For more information refer to the instructions supplied
with your decorative door or front.

G. Remote Controls, Wall Controls and Wall
Switches

Follow the instructions supplied with the control installed
to operate your

replace:

For safety:

• Install a switch lock or a wall/remote control with child

protection lockout feature.

• Keep remote controls out of reach of children.
See your dealer if you have questions.

H. Before Lighting Fireplace

Before operating this

replace for the

rst time,

have a

quali

ed service technician

• Verify all shipping materials have been removed from

inside and/or underneath the

rebox.

• Review proper placement of logs, rockwool and/or other

decorative materials.

•  Check the wiring.
•  Check the air shutter adjustment.
•  Ensure that there are no gas leaks.
•  Ensure that the glass is sealed and in the proper position

and that the integral barrier is in place.

WARNING! Risk of Fire or Asphyxiation! DO NOT

oper-

ate

replace with

xed glass assembly removed.

Determine if this

replace has a standing pilot or an

Intelli

re ignition system. Ask your dealer or open control

access panel, look at gas valve assembly.

• A standing pilot ignition will have a red or black ignitor

button (refer to Figure 2.3).

• An

Intelli

re ignition system will not have a button.

Ignitor Button

Figure 2.3 Ignitor Button

Содержание Direct Vent Gas Appliance CD4236ILR













































































Результаты поиска

Содержание Direct Vent Gas Appliance CD4236ILR

Отзывы:

Похожие инструкции для Direct Vent Gas Appliance CD4236ILR

Бренды по названию

Популярные бренды

Heatilator Direct Vent Gas Appliance CD4236ILR, Руководство пользователя

Результаты поиска

Содержание Direct Vent Gas Appliance CD4236ILR

Отзывы:

Похожие инструкции для Direct Vent Gas Appliance CD4236ILR

Бренды по названию

Популярные бренды