12
Heatilator • CRAVE4836/ST, CRAVE6048/ST, CRAVE7260/ST, CRAVE8472/ST Owner’s Manual • 2301-971 Rev. o • 3/16
F. Appliance Break-In
Initial Break-in Procedure
• The fireplace should be run three to four hours
continuously on high.
• Turn the
fi
replace off and allow it to completely cool.
• Remove
fi
xed glass assembly. See Section 4.
• Clean
fi
xed glass assembly. See Section 4.
• Replace the
fi
xed glass assembly and run continuously
on high an additional 12 hours.
This cures the materials used to manufacture the
fi
re-
place.
NOTICE! Open windows for air circulation during
fi
re-
place break-in.
• Some people may be sensitive to smoke and odors.
• Smoke detectors may activate.
G. Heat Management
Burn Rate
The CRAVE models have a variable burn rate which is
controlled by the remote control. Therefore the
fl
ame
height is adjustable.
The
fl
ame height may be adjusted as desired by locating
the
fl
ame option on the remote control and adjusting up or
down to desired
fl
ame height.
