14
To Insert Connector into Bench Top Stand.
1. Place the Micro USB connector into the stand as shown.
Make
sure USB symbol on connector and stand are adjacent when
USB slot on unit is facing user.
Replacing the Battery
Instrument must only be used with
the original manufacturer’s battery.
Battery must be completely
discharged before disposal.
Disposal should be performed in
accordance with all governmental
regulations.
To Insert Pipette Controller into Stand.
1. Place the connector into the stand as shown.
2. Grasp the stand with the other hand and slide the instrument
down the stand.
3. Make sure the connector inserts into the hole on the bottom of the
instrument. You may need to adjust the position of the instrument
to allow the connector to easily slide into the hole.
4. Do not force the connector into the hole.
Slide battery compartment
cover open
