Heathkit IT-12, Инструкция по сборке

Страница: 11 / 30

Page 9
( ) Mount the output transformer on the speaker so the two black wires are next to the voice coil terminals. Use 6-32
hardware.
( ) Mount the speaker and the speaker grill to the panel. Place a spacer washer between speaker and grill. At the same
time mount ground lug B. Use 6-32 hardware.
( ) Connect one end of a 3" length of bare wire to speaker lug 2 (Sl). Feed the other end thru ground lug B (S2) thru
terminal lug Cl (S2) and wrap around panel ground lug C2 (Sl).
( ) Cut one of the black leads of the output transformer to length, strip the end and connect to speaker lug 1 (NS).
( ) Connect one end of a 2" length of hookup wire to terminal lug A (Sl). Connect the other end to speaker lug 1 (S2).
This completes the panel assembly and wiring. Set aside to be mounted on the chassis later.