background image

4

598-1131-01

TROUBLESHOOTING GUIDE

SYMPTOM

Lights will not come
on.

Lights come on
in daylight.

Lights come on for
no apparent rea-
son.

POSSIBLE CAUSE

1. Light switch is turned off.
2. Flood light is loose or

burned out.

3. Fuse is blown or circuit breaker is

turned off.

4. Daylight turn-off is in effect 

(re-

check after dark).

5. Incorrect circuit wiring, if this is a

new installation.

6. Re-aim the sensor to cover de-

sired area.

1. Light Control may be installed in

a relatively dark location.

2. Light Control is in Test.

(Set control switch to an
ON-TIME position).

1. Light Control may be sensing

small animals or automobile traf-
fic 

(re-aim sensor).

2. R a n g e   i s   s e t   t o o   h i g h .

(Reduce Range).

TEN YEAR LIMITED WARRANTY

This is a "Limited Warranty" which gives you specific legal rights. You may also have other rights which vary from state
to state or province to province.
For a period of ten years from the date of purchase, any malfunction caused by factory defective parts or workmanship
will be corrected at no charge to you. Light bulbs are not covered. To obtain a refund or a replacement, return the product
to the place of purchase.
Not Covered - Repair service, adjustment and calibration due to misuse, abuse or negligence, light bulbs and other
expendable items are not covered by this warranty. Unauthorized service or modification of the product or of any furnished
component will void this warranty in its entirety. This warranty does not include reimbursement for inconvenience,
installation, setup time, loss of use, or unauthorized service.
This warranty covers only DESA Specialty Products™ assembled products and is not extended to other equipment and
components that a customer uses in conjunction with our products.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY
WARRANTY, REPRESENTATION OR CONDITION OF MERCHANT ABILITY OR THAT THE PRODUCTS ARE FIT
FOR ANY PARTICULAR PURPOSE OR USE, AND SPECIFICALLY IN LIEU OF ALL SPECIAL, INDIRECT, INCIDEN-
TAL, OR CONSEQUENTIAL DAMAGES.
REPAIR OR REPLACEMENT SHALL BE THE SOLE REMEDY OF THE CUSTOMER AND THERE SHALL BE NO
LIABILITY ON THE PART OF DESA SPECIALTY PRODUCTS™ FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO ANY LOSS OF BUSINESS OR PROFITS,
WHETHER OR NOT FORESEEABLE. Some states or provinces do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you. Retain receipt for warranty claims.

SYMPTOM

Lights stay on
continuously.

Lights flash on
and off.

Lights flash
once, then stay
off in Manual
Mode.

POSSIBLE CAUSE

1. A flood lamp is positioned too close to

the sensor or pointed at nearby ob-
jects that cause heat to trigger the
sensor. 

(Reposition the lamp away

from the sensor or nearby objects).

2. Light Control is pointed toward a heat

source like an air vent, dryer vent, or
brightly-painted heat-reflective surface.
(Reposition sensor. Reduce Range).

3. Light Control is in Manual Mode.

(Switch to Auto.)

1. Heat or light from the lamps may be

turning the Light Control on and off.
(Reposition the lamps away from the
sensor).

2. Heat being reflected from other ob-

jects may be affecting the sensor.
(Reposition sensor).

3. Light Control is in the Test mode and

warming up. 

(Flashing is normal un-

der these conditions).

1. Sensor is detecting its own lights. 

(Re-

position lamps to keep area below the
sensor relatively dark.)

TECHNICAL SERVICE

(Do Not Send Products)

If you experience a problem, follow this guide. You may also want to visit our Web site at: www.desatech.com. If the
problem persists, call* for assistance at 1-800-858-8501, 7:30 AM to 4:30 PM CST (M-F). You may also write* to:
DESA Specialty Products™
P.O. Box 90004, Bowling Green, KY 42102-9004
ATTN: Technical Service Specialty Products
* If contacting Technical Service, please have the following information available: Model Number, Date of
Purchase, and Place of Purchase.

No Service Parts Available for this Product

Содержание SL-5330

Страница 1: ...TIME switch on the sensor bottom to TEST MANUAL MODE ON TIME TEST 1 5 20 back on AUTO 1 Second OFF then Put the ON TIME switch in the 1 5 or 20 minute position Note When first turned on wait about 1 1 2 minutes for the circuitry to calibrate Manual mode only works at night because daylight returns the sensor to AUTO Flipthelightswitchoffforonesecond thenbackontotogglebetweenAUTO and MANUAL MODE Ma...

Страница 2: ...actory setting When screwing in the floodlamps do not overtighten For eave mount only Swing the sensor head towards the clamp screw joint Ifthesensorpopsoutoftheballjoint loosentheclamp screw and push the sensor back into the ball joint Tighten the clamp screw when done Thenrotatethesensorheadclockwise180 sothe controls face down Wall Mount Eave Mount For under eave installation the sensor head mu...

Страница 3: ...r head up down or sideways to change the cov eragearea Keepthesensor at least 1 2 5 cm away from the lamps Adjust the RANGE as needed RANGEsettoohigh may increase false triggering Secure the sensor head s aim by tightening the clamp screw Do not over tighten the screw Set the amount of TIME you want the lights to stay on after motion is detected 1 5 or 20 minutes Clamp Screw Ball Joint Aim Sensor ...

Страница 4: ...UCTS ARE FIT FOR ANY PARTICULAR PURPOSE OR USE AND SPECIFICALLY IN LIEU OF ALL SPECIAL INDIRECT INCIDEN TAL OR CONSEQUENTIAL DAMAGES REPAIR OR REPLACEMENT SHALL BE THE SOLE REMEDY OF THE CUSTOMER AND THERE SHALL BE NO LIABILITY ON THE PART OF DESA SPECIALTY PRODUCTS FOR ANY SPECIAL INDIRECT INCIDENTAL OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO ANY LOSS OF BUSINESS OR PROFITS WHETHER OR ...

Отзывы: