Heath Zenith 6168, Руководство пользователя

Страница: 4 / 24

-4- 200199-01
Your wireless chime has different selectable tunes:
Ding
(one note),
Ding-Dong
(two note), or Westminster (eight note) (Available on selected chimes). The
factory setting is for the Ding-Dong tune (or Westminster, when available). This
tune can be changed by following the instructions below.
•
Ding (one note tune)
Inside Sensor: Add a jumper to location 8.
•
Ding-Dong (two note tune)
Inside Sensor: Remove jumper from location 8.
Chime: Remove jumper from location 8.
•
Westminster (Eight note tune) (Available on selected chimes)
Inside Sensor: Remove jumper from location 8.
Chime: Add a jumper to location 8.
Note: All models have both front and back door tune capabilities. We recom-
mend the back door use the Ding tune and the front door use the Ding-Dong
tune (or
Westminster
tune, available on selected chimes). You may purchase
any Heath
®
/Zenith wireless push button for a second entrance.
WARNING: Disconnect chime unit from power source before
opening code access door. Close door and replace screw before
reconnecting to power.
12345678
1
2
3
45678
Inside
Sensor
Back of Chime
Tune Setting
Tune Setting (Not
used on all models)
Note: Some models might require the use of
tweezers to remove and replace the jumpers.
Figure 6
Remove screw to
open access door
Tune Settings