598-18-0
CAUTION:
Do
NOT
connect push
button to mechanical chime if push
button jumper is set for electronic
chime use. Doing so may result in
permanent damage to your chime.
FR
ONT
TR
A
N
S
REAR
DO NO
T OIL
Tone Bar
Figure 4 - Inside Typical Mechanical Chime
Plunger
Determine Chime Type
5. Locate your chime and remove the
cover. If you see tone bars and plungers
you have a mechanical chime (see
Figure 4). If not, you have an electronic
chime.
6. If you have a mechanical chime, go to
the
Troubleshooting
section, page 7. If
you have an electronic chime proceed
to step 7 on page 5.
