WARNING!
MAKE SURE NO PERSONS ARE IN FRONT OF MACHINE WHILE ADJUSTING THE MACHINE
FOR FAST BALLS, POP FLIES, OR GROUNDERS.
OPERATION INSTRUCTIONS
CAUTION:
Different types of balls will change the pitch dramatically. Make sure no persons are in front of
machine until machine is aimed properly and pitching accurately at desired target.
95 West 650 South • St. George, Utah 84770 • PH: 800-492-9334 • PH: 435-656-1756 • Fax: 435-688-0741
STEP 2:
Plug the PowerAlley Pro into any standard wall outlet and allow the motor to get to full speed
then place a ball into the elbow chute.
To adjust the pitch, loosen the thumb knob on the
pole clamp bolt until the housing can
pivot to the desired position.
Securely tighten the thumb knob back
into place.
STEP 3:
Adjust the Speed Control dial and
select the desired ball speed
from 1 to 10.
STEP 4:
To throw pop flies or grounders,
loosen the thumb knob on the
pole clamp until the housing
can rotate to the desired position.
Securely tighten the thumb knob
back into place.
STEP 1:
Before using the PowerAlley Pro pitching machine, use the two Ground Stakes (E) to secure the
back legs in place.
(E)
(E)
Ground
Stakes
