Thank you for purchasing the Heater Combo Pitching Machine. If you have
any questions or comments on how Heater Sports can improve the Heater
Combo Pitching Machine, please call our 24 hour
customer service hotline at (800) 492-9334.
WARNING!
• Do not put hands or
fingers in pitching machine.
• Make sure all persons are
clear of the ball path
and away from pitching
machine before pitching any
ball.
• Make sure you pitch only
one ball at a time.
• Make sure all balls are
out of machine before turn-
ing the pitching machine on.
• Do not stand in front of
pitching machine.
• Do not operate in moisture.
• Batter must wear NOCSAE
Approved Batting Helmet.
• This machine may cause
serious bodily injury if used
improperly.
• For adult operation only.
WARNING!
• Heater pitching machine
balls are the most accurate
balls for use in the Heater
Combo Machine. Real
leather balls can be used
but aren’t as accurate
because of the ball seams.
Batter should be aware at all
times.
• Always have legs set on the
ground before pitching to a
batter or the Heater Combo
Pitching Machine may move
and hit the batter causing
serious physical injury.
• Make sure you pitch only
one ball at a time.
• Pitching Machine Operator
must stand behind protective
safety screen.
95 West 650 South • St. George, Utah 84770 • PH: 800-492-9334 • PH: 435-656-1756 • Fax: 435-688-0741
Model# HTR599ABF
WARNING • WARNING • WARNING
• Make sure pitching machine is aimed and throwing properly before allowing
batter to step up and hit balls pitched from the Heater Combo Pitching Machine.
• Turn off pitching machine and auto-ball feeder motor when loading balls.
• Make sure batter is ready before turning on auto-ball feeder and machine.
• Make sure all persons stand clear of pitching machine and ball path.
• Make sure all persons are aware pitching machine is throwing balls automatically.
• Make sure machine operator is ready to turn off auto-ball power switch if necessary.
• Power Cords over 20 feet can lose energy and cause the Heater to pitch slower than normal.
HEATER COMBO SPEED CONTROL DIAL SPEEDS
Knob Setting = 10 - 60, 58, 56 MPH • Knob Setting = 5 - 32, 30, 28 MPH
Knob Setting = 9 - 54, 52, 50 MPH • Knob Setting = 4 - 27, 25, 23 MPH
Knob Setting = 8 - 46, 44, 42 MPH • Knob Setting = 3 - 26, 24, 22 MPH
Knob Setting = 7 - 40, 38, 36 MPH • Knob Setting = 2 - 25, 23, 21 MPH
Knob Setting = 6 - 36, 34, 32 MPH • Knob Setting = 0 - 0, 0, 0 MPH
®
