5
6
7
*IMPORTANT:
Make Sure
Head of Bolt is
Facing Toward
Frame!
8
Attach Part G Ball Protector to Release Handle by inserting Q
screws through the pole and the Protector. Secure with X
washers and AB acorn nuts.
Then, insert Part J through Hole 1 on Release Handle for pitching.
Part G
Part J
Q Q
X X
AB AB
L
T
Y
T
T
Locate Part H Throwing Arm Assembly and assemble to frame by
securing with Hardware shown in image.
IMPORTANT: WHEN
TIGHTENED, THROWING ARM SHOULD SWING FREELY SO
THERE IS NO FRICTION OR TENSION. OVER-TIGHTENING WILL
NOT ALLOW THE ARM TO SWING AS DESIGNED.
To assemble Spring to Mounting Arm, insert Spring into slot,
then slide O Bolt to secure Spring. Use V washer and Z lock nut
to secure assembly.
IMPORTANT: MAKE SURE THE SPRING IS
INSERTED SO THE BOLT HEAD ON THE FOOT PEDAL MOUNT-
ING BRACKET IS FACING TOWARDS THE FRAME AS SHOWN IN
IMAGE ABOVE.
O
V Z
Foot Pedal
Mounting Bracket
When using machine on sand, dirt, grass, or any soft ground
you should ALWAYS use the provided ground stakes to ensure
the machine pitches accurately. Insert stakes into front leg of
machine as the image above illustrates. If using machine on hard
surface, do not use provided stakes, but use sand bags (sold
separately) to help secure the machine. Never allow the machine
to bounce or jump while using.
AC
AC
AD
AD
AE
AE
6
www.HeaterSports.com
800-492-9334
Part H