**OPTION 1: FOR MACHINES WITH AIR FILLED TIRE: Follow Pre-Operation Instructions Below.
**OPTION 2: FOR MACHINES WITH SOLID TIRE: Skip This Section
PRE-OPERATION
WARNING:
MAKE SURE MACHINE IS UNPLUGGED AND THE TIRE IS NOT SPINNING WHILE CHECKING
Pre-Operation #1
Locate Allen Wrench (provided in package) and unscrew (3)
three wheel cover screws.
**Important:
Periodically inspect the tire to make sure it's not worn out or
punctured. Serious damage could result if operated in this
condition.
Pre-Operation #2
You'll see both the Tire & Hub have a BLACK magic marker line
drawn on them. These two lines should connect, as if they are
one line. This ensures the machine's tire is in balance and will
perform correctly. If the two lines are not touching, let all your
air pressure out of the tire and rotate the tire on the hub until
they do touch exactly.
Next, locate a tire pressure gauge (not provided) and check
tire pressure. Tire pressure should be between 40 - 50 lbs. If
tire pressure reads low, use an air pump to inflate the tire. If
tire pressure reads high, decrease the air pressure by pushing
down the air stem bubble located in the middle of the air stem.
**Important:
If tire isn't balanced, it will vibrate and sound loud.
Pre-Operation #3
Locate Allen Wrench (provided in package) and secure Wheel
Covers back on machine by tightening (3) three Wheel Cover
Screws.
Warning - Serious Bodily Injury:
Never operate the BaseHit
Pitching Machine until Wheel Covers are secured on the
machine with the (3) three Wheel Cover Screws.
Fuse Re-Set Button
The BaseHit Pitching Machine has a fuse reset button which
is designed to protect the electronic circuit in the machine. If
the machine will not turn on, check this button to make sure it
is not popped out. If it is popped out, press it back in to reset
the fuse circuit breaker. This should allow the BaseHit to
operate safely again.
2 Lines
5
www.HeaterSports.com
800-492-9334
