heatapp! T2B, Инструкция по эксплуатации, Страница: 70 / 135

Functions of the room- and radio components
S. 70
11.2 heatapp! drive
Fig.: 46: heatapp! drive
Fig.: 47: Bedienung heatapp! drive
1. "Enter" / "Lernkey"
2. Lock
3. Radio connection
4. "Down"
5. Setpoint temperature
6. Low battery
7. "Up"
8. Alarm
heatapp! drive is an electronic radiator thermostat for the heatapp! system for single room heat regulation of radiators in
heating systems.
The device is supplied with adaptors for Danfoss RA valves and valves with an M30 x 1.5 connection, two alkaline AA batteries
and a 2 mm Allen key.
heatapp! drive is a wireless actuator for wall-mounted radiators. The desired temperature is output to the display of the
heatapp! drive. As the thermostat function is already included in the heatapp! drive, no additional room sensor is required.
Regulation is performed by each heatapp! drive individually (even when there are several radiators in a room).
The heatapp! drive can also be operated directly at the radiator (see section „Setting Setpoint temperature”).