July 12, 2006
Page 29
Heat & Glo · Mission Bay · 250-7512F
Figure 8.4
Install left and right brick panels. Place in lower
channels and push toward the side.
Brick Panel tab
Figure 8.5
Fold retainer clips over brick panels to secure them
in place.
F. Positioning the Logs
While still breakable, the logs do not become fragile until
after the appliance is burned and they have cured. After
curing, any handling must be done with care as breakage
can easily occur.
PLEASE NOTE: Logs have been designed to work
specifically with the burner of this appliance. Exact
placement will ensure proper operation of your gas
appliance and reduce sooting.
Figure 8.6
The log set and brick panels are packed in the
components box.
Figure 8.7
Insert rear log (#1) onto log pan over stud on the
left, gently pulling log forward to the tab on the right.
Qty.
# in Fig.
1 Rear Log ...............................
1
1 Left Front Log ......................
2
1 Right Front Log ....................
3
1 Left Twig ..............................
4
1 Right Twig .............................
5
1
2
3
4
5
TAB
Figure 8.8
Place left and right front logs (#2 and #3) on burner
in the grooves provided on the burner surface.
