Heat Storm SIGNATURE Series, Руководство по установке

Страница: 11 / 16

1
1
OPERATING INSTRUCTIONS
• Electrical connection
A 15 AMP, 120 Volt, 60 Hz circuit with a properly
grounded outlet is required.
Ideally, the heater will be on a dedicated circuit as
other appliances on the same circuit may cause the
circuit breaker to trip or the fuse to blow when the
heater is in operation.
CAUTION: Do not exceed the current rating of the
outlet. Always plug heaters directly into a wall
outlet/receptacle.
Clean the SIGNATURE Series glass heater with a
soft, damp cloth before heating.
Switch on using the switch located on the side of the
control unit.